1995 Johnson/Evinrude Outboards 50 thru 70 3-cylinder Service Manual, Page 129Get this manual

1995 Johnson/Evinrude Outboards 50 thru 70 3-cylinder Service Manual, Page 129

Ohmmeter TestStop Button INotel All tests must be performed with the engine not contain combination stop button running 1sl
lanyard3Separate the 5-pin Amphenol connector between the power pack and stator assemblyf61 4Calibrate an ohmmeter on appropriate
scaleConnect meter leads between the stator 5-pin Amphenol connector, terminal "E"and clean engine ground The meter must
show high reading5Momentarily press inward on the stop button The meter must show low reading6Remove the clip and lanyard