1995 Johnson/Evinrude Outboards 50 thru 70 3-cylinder Service Manual, Page 130Get this manual

1995 Johnson/Evinrude Outboards 50 thru 70 3-cylinder Service Manual, Page 130

DR4141 DR4142 STEPCHARGE COIL TEST Ground Test 1Disconnect 5-pin Amphenol connector between stator and power pack 2Set peak-reading
and repair ground, or replace stator assembly4If no reading is indicated in Step 3, go to Output TestOutput Test 1Set peak-reading
voltmeter to "POS" and "500" 101 2Attach voltmeter black lead to stator connector, terminaIIA"Attach meter red lead to terminal
8 liB" 3Crank engine and observe meter If meter shows 250 volts or higher, go to STEPSENSOR COIL TEST If meter shows less