1995 Johnson/Evinrude Outboards 50 thru 70 3-cylinder Service Manual, Page 133Get this manual

1995 Johnson/Evinrude Outboards 50 thru 70 3-cylinder Service Manual, Page 133

Sensor Coil Ohmmeter Test Notel All ohmmeter tests must be performed with engine not running 1Before proceeding, you must
50 ohms Merc-O- Tronic M-700 meter800 50 ohms Fluke 29 Series II meter900 50 ohms INote The Fluke 29 Series II meter must
be set to the low ohms (40 0) scale for this testRead the operating instructions that came with the meterOhmmeter readings
will vary with individual meter impedanceYour readings r:night be slightly higher or lower, but should all be approximately
'equal 5Attach ohmmeter red lead to terminal "E"Attach meter black lead to terminal "0" Meter should read 450 50 ohms 6To
test for grounded condition, connect ohmmeter alternately between each terminal location and clean engine ground Meter must