1995 Johnson/Evinrude Outboards 50 thru 70 3-cylinder Service Manual, Page 160Get this manual

1995 Johnson/Evinrude Outboards 50 thru 70 3-cylinder Service Manual, Page 160

23Apply light coat of outboard lubricant to the corners of the connecting rod and rod capPlace frame on connecting rod using
increments to both rod cap screws28Loosen forcing screw and remove the frameRepeat Steps 22 thru 27 for remaining connecting
rods126 129Thoroughly clean and degrease crankcase mating flange of the cylinder block with OMC Cleaning Solvent and let
air dry 30Apply OMC Locquic Primer to the mating flange of the crankcase and let air dry 1271 31Apply OMC Gel-Seal lito the
crankcase mating flange of the cylinder blockThe application must cover the flange evenly and consistently without being
excessiveThe application must not come within in(6,4 mm) of labyrinth seals or main bearingsINotel OMC Gel-Seal I! has shelf
life of at least one year when stored at room temperatureTest the OMC Gel-Seal I! or replace it if the age of the tube cannot