1995 Johnson/Evinrude Outboards 50 thru 70 3-cylinder Service Manual, Page 161Get this manual

1995 Johnson/Evinrude Outboards 50 thru 70 3-cylinder Service Manual, Page 161

32Position the crankcase on the cylinder blockInstall all main bearing screws and nuts finger tight28 133Install the crankcase
CompoundInstall the screws finger tightrJ1l 37Starting at the center, torque all main bearing screws and nuts in stages to
18-20 ftIbs(24-27 Nm)1321 38Temporarily install the flywheel and key to rotate crankshaft and check for binding39Install
crankcase flange screws and pan support bracketsTorque screws to 60-84 inIbs(7-9 Nm)40Tighten the lower crankcase head screws
to 96-120 inIbs(11-14 Nm)41Lightly coat both sides of new exhaust cover gasket with OMC Gasket Sealing CompoundInstall the
gasket and exhaust cover331 42Starting at the center and expanding outward, torque all screws in stages to 60-84 inIbs(7-9