1995 Johnson/Evinrude Outboards 50 thru 70 3-cylinder Service Manual, Page 163Get this manual

1995 Johnson/Evinrude Outboards 50 thru 70 3-cylinder Service Manual, Page 163

Installation [";1 1Coat driveshaft splines with OMC Moly LubeDo not coat top surface of driveshaft as lubricant here may
adapter gasket dry; use no sealer3Use OMCUniversal Puller and lifting Eye, PIN 321537, or OMC lifting Fixture, PIN 396748,
to lower the powerhead assembly into placeIf necessary, rotate the flywheel in clockwise direction to align crankshaft and