1995 Johnson/Evinrude Outboards 50 thru 70 3-cylinder Service Manual, Page 184Get this manual

1995 Johnson/Evinrude Outboards 50 thru 70 3-cylinder Service Manual, Page 184

G2] 9Remove the thrust rod from the stern brackets1181 10Remove the stern bracket to spacer screwsport and starboardr:J7l
shock absorber basePosition the shock absorber in the spacerInstall the pin through the spacer and shock absorberInstall
the pin set screw in the spacer and tighten to torque of 24-26 inIbs(3-4 Nm)r:t8l 2Apply OMC Nut Lock to the stern bracket
to spacer screws Install the screws through the stern bracket into the spacer and tighten to torque of 18-20 ftIbs(25-27
Nm)3Install the thrust rod in the bottom set of holes of the stern bracket4Place the bushings in the shock absorber rod end
r:;;;l 5Manual Tilt ModelsIf any of the swivel bracket components were removed, refer to the reference pictures for correct