1995 Johnson/Evinrude Outboards 50 thru 70 3-cylinder Service Manual, Page 189Get this manual

1995 Johnson/Evinrude Outboards 50 thru 70 3-cylinder Service Manual, Page 189

f131 12Remove the tilt limit switch and retainer from the swivel bracket 1141 13Disconnect the trail lock spring and remove
and inspect the detent roller and springAssembly f'N'='J Before proceeding, be sure all components have been thoroughly cleanedReplace
any seals that have been removed Inspect all thrust washers and bushings for evidence of deterioration f17l1,8l 1Install
the detent roller and spring and the tilt support with bushing in the swivel bracket[!!1 2Install the two trim rod rollers