1995 Johnson/Evinrude Outboards 50 thru 70 3-cylinder Service Manual, Page 192Get this manual

1995 Johnson/Evinrude Outboards 50 thru 70 3-cylinder Service Manual, Page 192

Tilt Tube Servicing Removal Support the motor with suitable hoist 1Pull locking tabs on tilt limit cam loose from colla r2Remove
the spacer and adapter required in the next steps4Thread the spacer onto the starboard end of the tilt tube5Thread the adapter
onto the port end of the tilt tubef61 6Thread OMC Slide Hammer, PIN 432128, into the adapter until at least in(51 mm) of