1995 Johnson/Evinrude Outboards 50 thru 70 3-cylinder Service Manual, Page 208Get this manual

1995 Johnson/Evinrude Outboards 50 thru 70 3-cylinder Service Manual, Page 208

Disassembly 1Remove the propeller and mounting hardwareInspect the propeller for spun hub[] 2Drain the gearcase by first
Puller, PIN 378103, pull the propeller shaft bearing housing from the gearcase 5Remove the two retaining rings using OMC
Retaining Ring Pliers, PIN 331045Retaining rings are under extreme pressure during removal and installationWear safety glasses
and proceed with care to avoid unsnapping the ring from the pliersAfter the retaining rings are removed far enough from the
gearcase to clear the housing, release the tension on the pliers while retaining ring is still around the propeller shaft6Remove
the retainer plate from the gearcase COA3513 7Remove the larger thrust washerthrust bearingand reverse gear from the gearcaseRemove