1995 Johnson/Evinrude Outboards 50 thru 70 3-cylinder Service Manual, Page 220Get this manual

1995 Johnson/Evinrude Outboards 50 thru 70 3-cylinder Service Manual, Page 220

Screw in vacuum testerPump out to 3-6 in(76-127 mm) of mercury and see if vacuum holdsThen pump out to 15 in(381 mm) of mercury
plugs to 84-86 inIbs(9-10 Nm) Inspect the gearcase oil level after the engine test has been performed 16611671 29To adjust
the shift rod height, check from the shift rod hole to surface of the gearcase using OMC Universal Shift Rod Height Gauge,
PIN 389997, with the shift rod in the NEUTRAL positionCheck the shift rod height with the rod offset to the port30Rotate
the shift rod full turns up or down as necessary to obtain the correct adjustment Shift Rod Heights Models Models Models
212 in 132 in32 (551,4 mm 0,8 mm) 24732 in 132 in(615 mm 0,8 mm) 26 2332 in 132 in(703,9 mm 0,8 mm) COA3554 31Install the
water pump as described in Water Pump Servicing32During break-in period of reassembled gearcase, change the gearcase lubricant