1995 Johnson/Evinrude Outboards 50 thru 70 3-cylinder Service Manual, Page 221Get this manual

1995 Johnson/Evinrude Outboards 50 thru 70 3-cylinder Service Manual, Page 221

Installation 1Coat the driveshaft splines with OMC Moly LubeDo not coat top surface of the driveshaft as lubricant here may
to the following torques: Gearcase Retaining Screw in screws inscrew 216-240 inIbs 18-20 ftIbs(24-27 Nm) 336-360 inIbs 28-30
ftIbs(38-40 Nm) 5Apply OMC Gasket Sealing Compound to threads of the trim tab screwInstall the trim tab and align it with
marksTighten the retaining screw to 35-40 ftIbs(47-54 Nm)6Secure the shift rod: If equipped with shift rod retaining pinPlace
the shift rod in NEUTRALAlign the shift rod with the shift rod leverPull the shift rod lever away from the powerhead, and
engage the shift rodInstall the retaining pin The pin must compress the flat washer and spring washer against the castingIf