1995 Johnson/Evinrude Outboards 50 thru 70 3-cylinder Service Manual, Page 227Get this manual

1995 Johnson/Evinrude Outboards 50 thru 70 3-cylinder Service Manual, Page 227

141 3Remove the screw retaining the starter lockout assembly to the housing4Remove the nut from the starter pawl retaining
friction plate spring 9Hold the pulley in the starter housing while turning the starter over, legs downHold fingers clear
of the pulley and jar the starter housing against bench to dislodge the rewind spring and pulleyRemove the pulley bushing
from the pulleyr:jQl 10Remove the rope guide shoulder screw and guide from the starter housingCleaning and Inspection 1Wash
metal components in solvent and dry with compressed air 2 Inspect the rewind spring for broken end loops 3Examine the starter