1995 Johnson/Evinrude Outboards 50 thru 70 3-cylinder Service Manual, Page 246Get this manual

1995 Johnson/Evinrude Outboards 50 thru 70 3-cylinder Service Manual, Page 246

Solenoid CheckAll Models INotel All engine wiring must be disconnected from the solenoid before proceeding with this test
"+" connection, with OMC Black Neoprene No Load Current Draw, Electric StarterAll Models I Note Securely fasten starter in
vise or other suitable fixture before proceeding with this check1Locate battery rated at 350 CCA (70 amphrs or higher that
is in good condition and fully charged, to perform this test 2Connect 0-50 amp ammeter in series with heavy jumper between
the battery "+" terminal and the starter "+" terminal3Attach or hold vibration tachometer, such as Frahm Reed tachometer,
to the starter while performing the test 4Complete the circuit with heavy jumper between the battery "-" terminal and the