1995 Johnson/Evinrude Outboards 50 thru 70 3-cylinder Service Manual, Page 306Get this manual

1995 Johnson/Evinrude Outboards 50 thru 70 3-cylinder Service Manual, Page 306

Tilt Mode or Shallow Water Drive Mode t=J seals are pressurized and must hold pressure: Igl While running in the shallow
approximately 1500 psi (10300 kPa) the trim-up reliefvalve will open, allowing the fluid to return to the reservoir and the
filter valve CD will open, replacing fluid to the top of the tilt cylinderThe tilt cylinder will retract, lowering the motor