1995 Johnson/Evinrude Outboards 50 thru 70 3-cylinder Service Manual, Page 324Get this manual

1995 Johnson/Evinrude Outboards 50 thru 70 3-cylinder Service Manual, Page 324

C0A2472 COA2473 C0A2475 1 57139Located under the trim check valve is one return spring forthe pump control piston Using long-nosed
necessaryDo not allow these valves to soak in solvent, as they have soft rubber seats within themb.lf valve comes apart during
disassembly, it can be reassembled to work correctlyWhile the valve is apart, check the rubber seat on the valve core and
reassemble the valve in the order shownThe valve can be pressed together in soft-jaw vise, or with light pressure in an arbor
presscUsing flat punch, depress the valve springThe valve core should move back into position under spring tensiondLubricate
O-rings of check valve to be tested and install valve in OMC Tester, PIN 390063Torque valve to 50-60 inIbs(5-7 Nm)Use Stevens