1995 Johnson/Evinrude Outboards 50 thru 70 3-cylinder Service Manual, Page 325Get this manual

1995 Johnson/Evinrude Outboards 50 thru 70 3-cylinder Service Manual, Page 325

66 COA2478 COA2479 165144Using OMCTrim Cylinder End Cap Remover, PIN 324958, and breaker bar, remove both of the trim cylinder
the threads in the outside a-ring area 169148There are two differenttypes of seals in the trim end caps The one pictured
on the left is an a-ring The one pictured on the right is quad-ring The quad-ring is used for service 170149Oil and install
new quad-ring in the groove in the trim end capsOil and install new scraper To aid in the installation of the scraper, warm
the scraper in hot water 71l50Oil and install new outside a-ring and back-up ring on the trim end capsThe back-up ring goes
on top 172151Remove both trim pistons and rod assemblies from the manifoldTo remove, pull outward on the rod and wiggle the