1995 Johnson/Evinrude Outboards 9.9, 15 four-stroke Service Manual, Page 13Get this manual

1995 Johnson/Evinrude Outboards 9.9, 15 four-stroke Service Manual, Page 13

123 OR2065 OR2066 LI-;:::OR::-:42=03=-' Symbols Throughout this service manual, symbols are used to interpret electrical
to as infinity When "V" follows value on the meter face, the procedure is measuring voltage [] When "0" follows value on
the meter face, the procedure is measuring resistance0 is the symbol for ohm, the unit of measurement for resistanceValues
[] When "$," precedes value on the meter face, it indicates your reading should be less than, or equal to, the value shown
rn When should be greater than, orthe meter the value shownprecedes value on face, it indicates your reading equal to,OR4206