1995 Johnson/Evinrude Outboards 9.9, 15 four-stroke Service Manual, Page 38Get this manual

1995 Johnson/Evinrude Outboards 9.9, 15 four-stroke Service Manual, Page 38

Synchronization and Linkage Adjustments Remote Control Models INote You must perform this step-by-step procedure exactly
or rebuilding purposesIf the adjustment has been disturbed, refer to Carburetor Adjustment, Section 22Start the engine and
allow it to reach normal operating temperature3Stop the engineRemove cable anchor retainerRemove throttle cable trunnion
nut from anchor pocket 4Pull on throttle cable to move the throttle cam away from the cam follower roller5Connect your shop
tachometer pickup on the ignition coil's primary lead, and set its selector switch on 2-cycleStart the engine and verify
idle speed in FORWARD gear Stop the engineAdjust the idle speed screw to achieve 850 50 RPM in FORWARD gear 8Stop the enginePull
on throttle cable casing to remove backlashInstall throttle cable trunnion nut in anchor pocket and adjust nut to provide