1995 Johnson/Evinrude Outboards 9.9, 15 four-stroke Service Manual, Page 47Get this manual

1995 Johnson/Evinrude Outboards 9.9, 15 four-stroke Service Manual, Page 47

Heli-Coillnserts and Installers Use these Heli-Coil inserts on all models to repair damaged tJli=eadsThe installation kit
PCE0027 391436 391438 391439 391440 391441 391450 984963 391437 391448 391447 391446 391445 391444 913412 391443 391442 Installation
Instructions 1Drill to adequate depth using drill size supplied with kit2Use Heli-Coil tap supplied with packCheck thread
size on shank to make certain proper size is used3Screw insert onto mandrel until tang is fully engaged in driving contour4Screw
insert into tapped holeTop of insert must be onequarter to one-half turn below top surface5The tang must be removed to allow
full passage of screw into the insertThe tang may be broken off cleanly at the notch in the bottom coil with punch or rod
having diameter that just fits into the assembled insertMake sure that the punch or rod has square end (no chamfer)Place