1995 Johnson/Evinrude Outboards 9.9, 15 four-stroke Service Manual, Page 57Get this manual

1995 Johnson/Evinrude Outboards 9.9, 15 four-stroke Service Manual, Page 57

rn ohms scalethe solenoid windings, the purplewhite and black 2To test calibrate an ohmmeter on low and connect between leads
out lever both fittings[] 4To inspect or replace internal components, remove the four solenoid cover screws(]] 5When assembling
solenoid, back out screws in their holes to engage original threadsthen, tighten securelyInstallation 1Attach purplewhite
bullet connector and two hosesSecure large hose with tie strap2Install solenoid and bracketPosition ground lead under the