1995 Johnson/Evinrude Outboards 9.9, 15 four-stroke Service Manual, Page 82Get this manual

1995 Johnson/Evinrude Outboards 9.9, 15 four-stroke Service Manual, Page 82

5Remove screws retaining the ignition moduleRemove ignition module 6Remove screws retaining the ignition coil to powerheadRemove
the ignition module in position and torque screws to 60-84 inIbs(7-9 Nm) 3Install stop switch wire pin into Amphenol connector
using OIVIC Insert Tool, PIN 3226974Attach primary wire to coil 5Place the stator in positionApply OIVIC Nut Lockto threads