1995 Johnson/Evinrude Outboards 9.9, 15 four-stroke Service Manual, Page 90Get this manual

1995 Johnson/Evinrude Outboards 9.9, 15 four-stroke Service Manual, Page 90

4 DR5679 Ohmmeter TestStop Button INote All ohmmeter tests must be performed with the engine NOT running 1Most steering handles
the clip and lanyard 3Calibrate an ohmmeter on appropriate scaleConnect meter leads between stop button end of connector,
terminal "C", and clean engine ground The meter must show high reading4Momentarily, press inward on the stop button The meter
must show low reading5Remove the clip and lanyard The meter must show low reading To avoid sudden loss of control, replace