1995 Johnson/Evinrude Outboards 9.9, 15 four-stroke Service Manual, Page 94Get this manual

1995 Johnson/Evinrude Outboards 9.9, 15 four-stroke Service Manual, Page 94

STEPIGNITION MODULE TEST 1Prevent accidental starting of engine while testing; twist and remove all spark plug leads 2Twist
10-ohm, 10-watt resistor, Radio Shack No271-132, or equivalent4Set peak-reading voltmeter to "POS" and "500"[] 5Connect meter
red lead to adapter red lead, and meter black lead to clean engine ground6Crank engine and observe meter: Meter must show
100 volts or higher If primary lead has good output, test ignition coilRefer to Ignition Coil Tests If primary lead has no