1995 Johnson/Evinrude Outboards 9.9, 15 four-stroke Service Manual, Page 111Get this manual

1995 Johnson/Evinrude Outboards 9.9, 15 four-stroke Service Manual, Page 111

12Inspect the crankshaft sleeve and replace, if necessaryTo remove, use OMC Slide Hammer, PIN 432128, and OMC Small Jaw
cylinder wall14Mark pistons for location prior to removal from rods15Remove the rings from pistons using ring expanderDO
NOT save ringsInstall new set of rings with complete powerhead service16Use tool, as drawn on page 4-8, to remove wrist pin