1995 Johnson/Evinrude Outboards 9.9, 15 four-stroke Service Manual, Page 119Get this manual

1995 Johnson/Evinrude Outboards 9.9, 15 four-stroke Service Manual, Page 119

[[] 8Position oil pump to match the slot in the shaft with the pin in the cam []] 9Apply OMC Gasket Sealing Compound to the
and place seal, casing up, on cam38437 When starting seal over the cam, be sure the lips fit properly and the seal is square
in the bore13Use OMC Camshaft Seal Installer, PI 342214, and hammer to tap the seal into placeTap until installer contacts
the cylinder head40270 Cylinder Block and Crankcase 1Align marks on piston with marks on connecting rod to ensure proper
match2Lubricate wrist pin and wrist pin bore with oil and assemble wrist pin, rod, and pistonPush wrist pin through piston