1995 Johnson/Evinrude Outboards 9.9, 15 four-stroke Service Manual, Page 121Get this manual

1995 Johnson/Evinrude Outboards 9.9, 15 four-stroke Service Manual, Page 121

13Lubricate main and rod journals of crankshaft and thrust bearing with oilInstall crank and thrust bearing, reliefs facing
in sequence shown17Apply OIVIC Gasket Sealing Compound to casing of new upper crankshaft seal, and oil to the seal lipsINotel
When starting seal over the crankshaft, be sure the lips fit properly and the seal is square in the bore 18Remove keys from
the crankshaft and place the seal, casing up, on the crankshaft 19Use CIVIC Upper Crankshaft Seal Installer, PIN 342213,
and the crankshaft pulley nut to press seal into placeTurn nut until installer contacts the powerhead20Apply CIVIC Gasket
Sealing Compound to casing of new lower crankshaft seal, and oil to the lipsPlace the seal, casing up, on the crankshaft
21Use CIVIC Lower Crankshaft Seal Installer, PIN 342215, and hammer to tap the seal into placeTap until installer contacts