1995 Johnson/Evinrude Outboards 9.9, 15 four-stroke Service Manual, Page 127Get this manual

1995 Johnson/Evinrude Outboards 9.9, 15 four-stroke Service Manual, Page 127

Neutral Start Switch AdjustmentTiller Electric INote Disconnect the battery cables at the battery[]J 1To test, shift motor
Neoprene Dip to the connectionReconnect the battery cables Removal 1Remove screw and wave washer handle retaining the shift
]] 2Remove adjustment screw and nut from neutral start button and remove button3Remove screw retaining neutral start switch
[}] 4Disconnect the red wires from the starter motor5Pull wires out of grommetInstallation [}] 1Reinstall switch wires through
grommetConnect the red wires to the starter motorApply OMC Black Neoprene Dip to the connections 2Install switch to shift
bracket and tighten screw securely3Install start button on shift handle and secure with screw and nut 4Install shift handle