1995 Johnson/Evinrude Outboards 9.9, 15 four-stroke Service Manual, Page 128Get this manual

1995 Johnson/Evinrude Outboards 9.9, 15 four-stroke Service Manual, Page 128

Shift Lever and Linkage Service Removal 1Remove the lower engine covers as described in Powerhead Servicing, this section
bushings []] 7Inspect components and replace if necessaryInstallation 1Install shift shaft assembly and bushingsApply OMC
Nut Lock to screw and install with washerTorque to 15-17 ftIbs(20-23 Nm) 2Position shift detent springs is placeApply OMC
Nut Lock to threads of screw and torque to 84-106 inIbs(10-12 Nm)3Slide clevis onto linkInstall clip on shift link 4Install
shift handle and secure with wave washer and screw5Install the drive pin and clip in shift handle38087 6Shift gearcase to