1995 Johnson/Evinrude Outboards 9.9, 15 four-stroke Service Manual, Page 145Get this manual

1995 Johnson/Evinrude Outboards 9.9, 15 four-stroke Service Manual, Page 145

1 58" 1.0PIPE DRC5257 []]NoteTo remove the upper side mounts without damaging the mounts or housing, make removal tool using
hole in mount is positioned to the rear m 2Install the two lower side mounts, lower front mount, and shift rod grommet[]
3Position the swivel bracket to the housing and install the two lower mount bracketsApply OMC Nut Lock to threads of screws
and torque to 60-84 inIbs(7-9 Nm) rn rnTorque to the upper mount to swivel bracket screw and 4Install locknut15-17 ftIbs(20-23
Nm)Apply OMC Lock to screws and install 84-106 inIbs(9-12 Nm) brackets 5Install cover sealApply OMC Gasket Sealing Compound
to water seal and exhaust seal and install6Apply OMC Gasket Sealing Compound to new housing cover gasket and install coverApply