1995 Johnson/Evinrude Outboards 9.9, 15 four-stroke Service Manual, Page 164Get this manual

1995 Johnson/Evinrude Outboards 9.9, 15 four-stroke Service Manual, Page 164

17Oil new a-ring and install it on the pivot pinApply OVIC Nut Lock to the threads of the pivot pinUse the yoke locator to
gear 20Apply OVIC Needle Bearing Assembly Grease to the propeller shaft spring and two detent ballsInstall the spring and
balls in the propeller shaftAlign the two detent balls with the two grooves in internal splines of the clutch dog21Aid installation
of loose detent ball with flat blade screwdriverPush the propeller shaft into the clutch dog, forward gear, and the forward
bearing22Hold propeller shaft in place and move shift rod up to NEUTRAL position[]] 23Slide the reverse gear onto the propeller