1995 Johnson/Evinrude Outboards 9.9, 15 four-stroke Service Manual, Page 175Get this manual

1995 Johnson/Evinrude Outboards 9.9, 15 four-stroke Service Manual, Page 175

Assembly Wear safety glasses while disassembling and assembling manual starters because of rewind spring tension1Lubricate
down, carefully turn pulley counterclockwise until spring is completely drawn into starter housingContinue turning pulley
carefully until spring is wound tight5Unwind pulley 3-4 revolutions and line up end of rope with guide in starter housingPull
rope through guide6Pull the starter rope out far enough to tie slip knot in the rope7Route the rope through the handle and
install rope in the anchor 8Release the slip knot and allow rope to wind into starter9Torque spindle screw to 120-145 inIbs(14-16