1995 Johnson/Evinrude Outboards 9.9, 15 four-stroke Service Manual, Page 188Get this manual

1995 Johnson/Evinrude Outboards 9.9, 15 four-stroke Service Manual, Page 188

Starter System Voltage Drop Test By making systematic check of the starter system, any component or electrical connection
key switch to START to crank engineVoltage reading should not exceed 0.3 voltIn Step 2, connect the voltmeter leads only
while the engine is cranking, or damage to the voltmeter can occur 2Connect voltmeter negative lead to the starter side of
the starter solenoid terminalWhile cranking engine, connect voltmeter positive lead to starter solenoid opposite terminalVoltage
reading should not exceed 0.2 voltRemove voltmeter positive lead from starter solenoid and stop cranking engineU Safety Related