1995 Johnson/Evinrude Outboards 9.9, 15 four-stroke Service Manual, Page 194Get this manual

1995 Johnson/Evinrude Outboards 9.9, 15 four-stroke Service Manual, Page 194

t o37152 37153 []] INote Before disassembly, scribe marks on frame and end caps for reference during reassembly 6Remove the
drive cap end and frame 5Install insulated brush and terminal set in commutator end cap with long lead in slotPosition the
insulators and nut as shown in figure INotel Reversing brushes will cause motor to run backwards 6Install brush springs and
brushes in holderScrews secure ground brush leads and holderInsert insulated brushes in holder 7Assemble end cap to frame
and field, aligning notch and ribA suitable tool for holding brushes in place can be made from putty knife 8Put drop of oil