1995 Johnson/Evinrude Outboards 9.9, 15 four-stroke Service Manual, Page 195Get this manual

1995 Johnson/Evinrude Outboards 9.9, 15 four-stroke Service Manual, Page 195

13 37396 9Install bracket on end capApply OMC Screw Lock to threads and torque screw to 95-100 inIbs(11-12 Nm)10Install pinion
to compress ring 14Install protective cap over armature shaft and spacer 15Refer to No Load Current Draw, Electric Starter
to check starter operationInstallation 1Apply OMC Nut Lock to threads of starter motor screwsPlace the starter motor in position
and install side screwTorque to 14-16 ftIbs(19-22 Nm)Tighten top screw securely 2Connect the starter motor wire at the terminal
on the bottom of the starterApply OMC Black Neoprene Dip to the connectorsInstall bracket screw retaining bracket to powerheadTorque