1996 Johnson Evinrude "ED" 40 thru 55 2-Cylinder Service Manual, P/N 507124, Page 41Get this manual

1996 Johnson Evinrude "ED" 40 thru 55 2-Cylinder Service Manual, P/N 507124, Page 41

Submerged Engines Engine Dropped Overboard (Not Running) If engine is recovered from water immediately, it must be serviced
engine in horizontal position (spark plug openings down) and work out all of the water by slowly rotating flywheel approximately
20 times or until there are no signs of water5Drain carburetorsplace engine in upright position and remove carburetors for
disassembly and draining6Starters, electrical connectors, and all electrical equipment should be completely disassembled,
cleaned, flushed with fresh water, treated with water displacing electrical spray, and thoroughly dried before assembly7Inject
outboard lubricant into spark plug holes8Reassemble parts you removed and disconnected Start engine (follow starting instructions)
and run 1 hour using the "break-in" fueloil mixtureRun the engine on "break-in" fueloil mixture for approximately three hours
after servicing See Break-in Procedure in this SectionFor models withIf oil line has become disconnected, the oil line must