1996 Johnson Evinrude "ED" 40 thru 55 2-Cylinder Service Manual, P/N 507124, Page 81Get this manual

1996 Johnson Evinrude "ED" 40 thru 55 2-Cylinder Service Manual, P/N 507124, Page 81

Installation Recommendations INote Carefu lIy, follow the nsta lIation instructions packaged with the VRO oil reservoirIncorrect
the instaHation is extended, the oil hose between the primer bulb and engine must be one continuous section with no fittings
or connectionsDo not add on to the existing hoseThe wiring harness can be extended by soldering on additional 16-gauge wire
to each leadProtect the connections with shrink tube and electrical tapeObserve proper wire color for identification4When
making connections in the oil supply system, use only the clamp supplied with the system Do not use tie strapsThey do not
provide adequate clamping action Do not use metal worm clamp on vinyl hoseIt can damage the hose and cause leakage5Test the
"LOW OIL" warning circuit before filling the oil reservoir: Make all electrical connections and connect the engine's battery
Turn the key switch ON With the reservoir empty, the System Check gauge "LOW OIL" light should turn onIf the light does not