1996 Johnson Evinrude "ED" 40 thru 55 2-Cylinder Service Manual, P/N 507124, Page 90Get this manual

1996 Johnson Evinrude "ED" 40 thru 55 2-Cylinder Service Manual, P/N 507124, Page 90

Warning Signals INotel Push fuel hose off fuel fittingsdon't pullIf pushing won't separate hose and fitting, carefully cut
Circuit Check, Section If the circuit does not activate within ten minutes and there is battery voltage present at the pump,
and the tachometer circuit is okay, check the warning system as described in Section 8, System Check Engine Monitor If battery
voltage is present at the pump, the tachometer circuit is okay, and the warning system is okayrepair or replace the pump5Trim
end of oil hose and secure it to the pumpDO NOT prime oil hoseRun engine at 1000 RPM to verify "NO OIL" signal disappears
If "NO OIL" signal does not disappear, repair or replace the pumpI Note When testing is complete, be sure all oil hose connections
are airtight to avoid possible powerhead damageI Note The "LOW OIL" and "NO OIL" signals alert the operator to possible system