1996 Johnson Evinrude "ED" 40 thru 55 2-Cylinder Service Manual, P/N 507124, Page 119Get this manual

1996 Johnson Evinrude "ED" 40 thru 55 2-Cylinder Service Manual, P/N 507124, Page 119

Ignition Component ReplacementCD IIAmp '" 1To avoid accidental starting of engine while servicing, twist and remove all spark
bullet connectors if necessaryf811gl 9Route leads and install clamp , plateand spiral All component leads must be routed
through clamp and plate in single layer, not twisted or crossed over another lead10Apply OMC Nut Lock to the threads of the
five ignition plate screwsInstall the ignition plate on the retainer plateTorque five retaining screws to 25-35 inIbs(2,8-4,0
Nm)11 Check for sufficient slack on ignition component leadsRoute component leads through wire clampsi.iQl 12Position OMCLocating
Ring, PI 334994, over machined bosses on the ignition platePush the locating ring in toward the component to be installedHold