1996 Johnson Evinrude "ED" 40 thru 55 2-Cylinder Service Manual, P/N 507124, Page 125Get this manual
10112 in (26,7 em) DRC6251 7Attach ohmmeter leads to terminals "C" and "0": If meter shows 400 40 ohms, replace power pack
in the engine harness tan wire circuit at position 1Disconnect engine harness 6-pin Deutsch connector that contains the tan
wire2Disconnect temperature switch tan lead 3Calibrate ohmmeter on appropriate scaleUsing jumper wires, connect meter between
engine harness tan lead and engine harness 6-pin connector terminal "6"Note reading 4Reverse meter connections or press "polarity"