1996 Johnson Evinrude "ED" 40 thru 55 2-Cylinder Service Manual, P/N 507124, Page 187Get this manual

1996 Johnson Evinrude "ED" 40 thru 55 2-Cylinder Service Manual, P/N 507124, Page 187

Touch- Trim Servicing ill assembly The Touch-Trim TM unit must be serviced as complete No detail parts are availableTo avoid
bracketRetain cable nut6Slide cable nut down new cable7Loop cable down from lever, up past clamp, across and in front of
cylinder, and down port side to valve8Apply OMC Triple-Guard grease to cable retainer cavity and cable ball end9Apply light
coating of Permatex No2 to external threads of slide valve bodyf31 10Attach cable ball end to slide valvePush down on cable
retainer and attach cable nut to valve bodyTorque nut to 36-48 inIbs(4-5 Nm)11Secure cable with cable clampf51 12For initial
adjustment, thread ball connector onto cable until cable retainer CAN JUST BE PULLED INTO ALIGNMENT WITH ANCHOR BLOCK ON
STERN BRACKET, with ball connector pushed against ball "" If valve body starts to unscrew from cylinder assem- Safety Related