1996 Johnson Evinrude "ED" 40 thru 55 2-Cylinder Service Manual, P/N 507124, Page 203Get this manual

1996 Johnson Evinrude "ED" 40 thru 55 2-Cylinder Service Manual, P/N 507124, Page 203

Water Pump Servicing If the gearcase has been in service for any length of time, it is good policy to install water pump
not pump waterCD 3Place the a-ring in the groove in the impeller housing [] 4Lightly coat the exterior of the impeller cup
with OMC Gasket Sealing CompoundInstall the cup in the impeller housingThe cup locks in place in the housing with square
index tab[5Lightly coat the liner with oilWith counterclockwise rotation, install the impeller into the liner with slot for
impeller cam facing out[] 6Run thin bead of OMC Adhesive sealant in the seal groove, and install the specially shaped a-ring
seal rnwith the Place the water tube grommet up.the impeller water []] 7inside chamfered edge facing in Secure the housing
tube bracket to the impeller housing[] 8Apply thin bead of OMC Adhesive sealant to groove of the impeller housing grommetPlace