1996 Johnson Evinrude "ED" 40 thru 55 2-Cylinder Service Manual, P/N 507124, Page 211Get this manual

1996 Johnson Evinrude "ED" 40 thru 55 2-Cylinder Service Manual, P/N 507124, Page 211

Propeller Shaft Bearing Housing Servicing Inspect the bearings in placeIf bearing is removed for any reason, it must be replaced
or 326556Apply ONIC Gasket Sealing Compound to the metal casing of the seals before installingInstall the inner seal with
lip facing toward the bearing housing and install the outer seal with lip facing away from the bearing housingApply OMC TripleGuard
grease to the seal lips after installing15501 If installing an extended-lip seal, use ONIC Seal Installer, PIN 342666Apply
oil to the casing of the seal before installingInstall the seal with the exposed lip facing away from the bearing housingPress
the seal into the housing until the tool seatsApply OMC Triple-Guard grease to the seal lips after installing 4Lightly apply
OMC Triple-Guard grease to new bearing housing a-ringInstall the O-ring in groove of the housing Driveshaft Bearing Housing