1996 Johnson Evinrude "ED" 40 thru 55 2-Cylinder Service Manual, P/N 507124, Page 218Get this manual

1996 Johnson Evinrude "ED" 40 thru 55 2-Cylinder Service Manual, P/N 507124, Page 218

19Thread the shift lever and connector assembly onto the shift rod nine turns 20Install shift cradle on shift shaft with
before proceeding INoteVerify that the 23Install new seal on the shift lever screwApply OMC Nut Lock to threads of the screw
24Move the shift rod to align hole in the shift lever with hole in gearcaseInstall and tighten the screw to 48-80 inIbs(5-9
Nm) 25Push the shift housing in positionApply OMC Gasket Sealing Compound to threads of the retaining screwsInstall and tighten
the screws to 60-84 inIbs(7-9 Nm)26Using CIVIC Needle Bearing Assembly grease, place the reverse gear thrust bearing on shoulder