1996 Johnson Evinrude "ED" 40 thru 55 2-Cylinder Service Manual, P/N 507124, Page 230Get this manual

1996 Johnson Evinrude "ED" 40 thru 55 2-Cylinder Service Manual, P/N 507124, Page 230

31 DR2061 9Lightly apply OMC Triple-Guard grease to new bearing housing a-ringInstall the a-ring in its groove in the housingInstall
housing: If installing two back-to-back seals, use OMC Seal Installer, PIN 326549Apply OMC Gasket Sealing Compoundto the
metal casings ofthe seals before installingInstall the inner seal with flush lip facing toward the bearing housing, then
the outer seal with extended lip facing away from the bearing housingApply OMC Triple-Guard grease to the seal lips after
installing If installing an extended-lip seal, use OMC Seal Installer, PIN 342665Apply oil to the casing of the seal before
installingInstall the seal with the exposed lip facing away from the bearing housingPress the seal into the housing until