1996 Johnson Evinrude "ED" 40 thru 55 2-Cylinder Service Manual, P/N 507124, Page 245Get this manual

1996 Johnson Evinrude "ED" 40 thru 55 2-Cylinder Service Manual, P/N 507124, Page 245

16 27115 18Remove thrust washer and collar from driveshaftRemove retainer ring if required 19If removed, install retaining
makes contact with retaining ring 21Using retaining ring pliers, install snap ring with sharp edge of it facing away from
bearingMake sure the retaining ring is seated in its groove in the driveshaftWear safety glasses and proceed with care to
avoid unsnapping the ring from the pliers 22Place spacer and seal carrier assembly onto the driveshaftApply OMC Triple-Guard
grease to two new O-rings and install on seal carrier 1201 23Fill bearing housing cavity with OMC Marine Wheel Bearing Grease24Heat