1996 Johnson Evinrude "ED" 40 thru 55 2-Cylinder Service Manual, P/N 507124, Page 260Get this manual

1996 Johnson Evinrude "ED" 40 thru 55 2-Cylinder Service Manual, P/N 507124, Page 260

COA1365 G7l8Bend the inside loop of the rewind spring in toward the center of the starter housingEngage the slot of the pulley
the starter pawl plate CDPress the other end of spring on the boss ofthe pulleyPosition the starter pawl plate on the pulleyf21l13Clean
threads of the starter pawl plate retaining screw and nut to remove adhesiveInstall the starter pawl plate retaining screw
Q) and washer into the starter housingTighten screw to torque of 120-144 inIbs(14-16 Nm)Spray threads of starter pawl plate
retaining screw that protrude through the starter housing and threads of the nut with OMC Locquic PrimerApply OMC Nut Lock
to the threads of the nutInstall and tighten the nut securely14Using the shoulder screw, install the rope guide to the starter
housingTighten the shoulder screw securely!22115.lf removed, install the starter handle bracket to the starter housingBe