1996 Johnson Evinrude "ED" 40 thru 55 2-Cylinder Service Manual, P/N 507124, Page 275Get this manual

1996 Johnson Evinrude "ED" 40 thru 55 2-Cylinder Service Manual, P/N 507124, Page 275

Solenoid Tests INote All engine wiring must be disconnected from the solenoid before proceeding with this test 1Calibrate
OMC Black Neoprene Dip No Load Current Draw, Electric Starter INoteSecurely fasten starter in vise or other suitable fixture
before proceeding with this check1Locate battery rated 350 cold cranking amps or higher that is in good condition and fully
charged 2Connect 0-50 amp ammeter in series with heavy jumper between the battery "+" terminal and the starter "+" terminal3Attach
or hold vibration tachometer, such as Frahm Reed tachometer, to the starter4Complete the circuit with heavy jumper between
the battery "-" terminal and the starter frame 5Monitor the starter RPM and current draw and refer to the chart below for