1996 Johnson Evinrude "ED" 40 thru 55 2-Cylinder Service Manual, P/N 507124, Page 298Get this manual

1996 Johnson Evinrude "ED" 40 thru 55 2-Cylinder Service Manual, P/N 507124, Page 298

WATER TEMP Circuit 1Separate the connector between the engine harness and the temperature switch 2Using jumper wire, connect
OIL Circuit 1Remove the four screws retaining the pickup assembly to the oil tank2Turn the key switch to ON positionLift
the pickup assembly out of the tank and hold it uprightAs the float drops, the gauge LOW OIL light should turn onIf the LOW
OIL light does not turn on, disconnect the tank pickup 2-pin connectorConnect the two terminals in the engine harness connector
together with jumper ire If the LOW OIL light turns on after connecting the two terminals together, repair or replace the
oil tank pickup assembly If the LOW OIL light does notturn on after connecting the two terminals together, troubleshoot the