1996 Johnson Evinrude "ED" 40 thru 55 2-Cylinder Service Manual, P/N 507124, Page 301Get this manual

1996 Johnson Evinrude "ED" 40 thru 55 2-Cylinder Service Manual, P/N 507124, Page 301

Key Switch Function 1With the engine key switch in OFF position, the tester IGNITION light should be off If the IGNITION
turn on when the key switch is in START position If the START light turns on when the control handle is in FORWARD or REVERSE,
troubleshoot the neutral start switch and yellowred circuitCheck the key switch and remote control for adjustment 4Move remote
control handle to NEUTRAL positionTurn the engine key switch to START positionThe tester START light should turn on If the
START light does not turn on, troubleshoot the yellowred circuit for an openCheck the key switch, neutral start switch, and
remote control adjustment 5With the engine key switch in START position, push key in to activate the primer circuitThe tester
PRIME light should turn on If the PRIME light does not turn on, troubleshoot the purplewhite and purplered circuits for an
open, and check the key switch System Check Gauge Function 1To test the gauge self-test feature, turn the engine key switch